Recap: 26th Annual NJDOT Research Showcase

The 26th Annual NJDOT Research Showcase provided an opportunity for the New Jersey transportation community to learn more about the broad scope of research projects and technology transfer activities being conducted by institutions of higher education partners and their associates. The annual event serves as a showcase to highlight the benefits of transportation research, including NJDOT’s own program. This event was an in-person event with a livestreaming option with sessions held from 9:00am-2:45pm on October 23, 2024.

This year’s Showcase theme, “Pathways to Sustainability,” served as the organizing framework for the speakers and panelists during the morning plenary session. Throughout the day the Research Showcase featured presentations on infrastructure, safety, and sustainability topics being performed by research faculty, staff, students, and NJ agencies. Several awards were presented in recognition of research and implemented innovations.

The Research Showcase Program Agenda provides more information on the day’s proceedings, including presented topics and invited speakers. Recordings of the plenary and breakout sessions, and the presentations and posters shared during the event can be found below.

MORNING

WELCOMING AND INTRODUCTORY REMARKS

David Maruca, Program Development Administrator, Rutgers Center for Advanced Infrastructure and Transportation (CAIT), served as the moderator for the morning session, offering some housekeeping remarks and walked through the morning’s agenda.

Morning Plenary and Keynote

Eric Powers, Assistant Commissioner Statewide Planning, Safety and Capital Investment at NJDOT, welcomed attendees to the 26th Annual NJDOT Research Showcase, explaining the purpose and theme of the event, “Pathways to Sustainability,” and acknowledging several parties, including NJDOT Bureau of Research, Innovation and Information Transfer (BRIIT) staff, Rutgers-CAIT, and the leadership of NJDOT and FHWA for their planning and participation in the day’s event along with the research partners whose work was being showcased.

Francis O’Connor, Commissioner, NJDOT, thanked several partners for their involvement in organizing the Research Showcase event. He expressed his enthusiasm for the research mission, noting that research is at the heart of progress for innovation in transportation. He framed the event as an opportunity to convene and collaborate with talented researchers and staff in tackling challenges that still confront us in transportation. Mr. O’Connor spoke about the day’s sustainability theme and emphasized the integral importance of safety in all that the agency does. The recent actions by NJDOT to improve safety for all road users, and the NJDOT highway workforce were highlighted by the Commissioner, among other topics.

Francis O’Connor, Commissioner, New Jersey Department of Transportation

Sutapa Bandyopadhyay, Planning and Program Development Manager, Federal Highway Administration (FHWA) New Jersey Division, praised the NJDOT Research Showcase’s “Pathways to Sustainability” theme and noted its close alignment with FHWA’s newest strategic plan which contains climate and sustainability as a core goal. She spoke of the strategic plan’s focus on greenhouse gas (GHG) emissions reduction and resilient infrastructure. She highlighted select formula and discretionary programs supported through the Infrastructure Investment and Jobs Act (IIJA), including the Carbon Reduction Program, the National Electric Vehicle Infrastructure (NEVI) deployment, and discretionary programs to reduce truck emissions in port facilities. In her remarks, she also emphasized the importance of research to assist in supporting the current administration’s major planning goals and targets (e.g, net-zero carbon emissions by 2050, adoption of resiliency plans by 50% of the states and MPOs by 2026, and 40 percent of the transportation clean energy benefits delivered to disadvantaged communities in alignment with the Justice40 initiative).

Jim Tymon, Executive Director at American Association of State Highway and Transportation Officials (AASHTO) provided the keynote address, “Navigating the Storm: Resilience, Sustainability and Surface Transportation”. His address reminded those in attendance of the importance of collaboration in continuing to build a resilient and sustainable transportation network. 

Mr. Tymon began his talk by introducing AASHTO, a multi-modal focused trade association that works with 52 state DOTs (including D.C. and Puerto Rico) to provide codified guidance and a platform for sharing knowledge. AASHTO is governed by a strategic plan, created in 2020, that expands their focus beyond the technical goals of transportation to developing “quality of life through strategic leadership”.

AASHTO hosts over thirty different committees and councils in which state DOTs can learn from each other’s experiences. Tymon’s remarked that AASHTO’s President has coined this process as “R&D” — or rip-off and duplicate. This form of “R&D” keeps departments from having to re-invent the wheel themselves and often leads to more successful outcomes.

This collaboration, he pointed out, is necessary for navigating the storm of increased climate disasters and unpredictable weather conditions. In the transportation field, the effects of climate change are both economically devastating and logistically challenging to address. In 2023 alone, climate related disasters cost the U.S. at least $92.9 billion in damages and in the past forty-three years, there have been 376 disasters, each costing over $1 billion. He stated, “Whether or not you are a climate change denier, or somebody that believes in the fact that our climate is changing, we have events that we are dealing with on a regular basis that we need to adapt to and that we need to take into account as we are dealing with our transportation network”.

Mr. Tymon proceeded with additional data and statistics to illustrate how State DOTs were fiscally impacted by the storms. Mr. Tymon laid out two avenues of solutions for addressing this growing issue: 1) building a more resilient transportation system; and 2) building a more sustainable transportation system.

Jim Tymon, Executive Director at American Association of State Highway and Transportation Officials (AASHTO)
Navigating the Storm: Resilience, Sustainability and Surface Transportation. Mr. Jim Tymon, Executive Director, American Associations of State Highway and Transportation Officials (AASHTO).

To build a resilient transportation system and network, Mr. Tymon recommended deeply considering how we are designing and building transportation systems and taking into consideration a variety of changing climate factors. Mr. Tymon presented the Resilience Planning Cycle from the Port Authority of New York and New Jersey as a model for this type of planning. Fortunately, there is a variety of federal assistance programming available through the Infrastructure Investment and Job Act, including the PROTECT program. PROTECT (Promoting Resilient Operations for Transformative, Efficient, and Cost-saving Transportation) is a formula program that is given annually to each state to use for state resilience projects. This funding can also assist States with the development of a state Resilience Improvement Plan, which is not a requirement, but does ensure a higher federal match.

Mr. Tymon’s second recommendation, to build a more sustainable transportation system, can be made possible through intentional efforts such as encouraging a modal shift by transportation users. He noted that encouraging a shift of transportation usage from single use cars to buses, trains, walking, cycling, or using more fuel-efficient cars, can help to reduce carbon emissions that may slow the effects of climate change.

AASHTO recently assisted with the administration’s U.S. National Blueprint for Transportation Decarbonization, which laid out guidance for decarbonizing the transportation network. He highlighted several methods in the Blueprint from planning and leveraging telework, to e-commerce and travel demand management. State agencies receive financial support for developing carbon reduction strategies through programs like the Carbon Reduction Program as well as the National EV Infrastructure Program (NEVI).

Mr. Tymon closed his talk by sharing a recent commercial created by the Tennessee Department of Transportation which aired during a recent football game between Florida and Tennessee. The video highlighted the collective rebuilding and road improvement efforts of Tennessee DOT and Florida DOT volunteers in the wake of Hurricane Helene. Mr. Tymon explained that prior to landfall, Hurricane Helene was expected to impact Florida greatly. To help, Tennessee DOT members were preparing to travel down to Florida in its wake. Instead, when Tennessee became more impacted because of the Hurricane, Florida DOT employees traveled up to Tennessee to help. The video and situation, Mr. Tymon noted, represents how state DOTs “can work together to help mitigate some of those impacts (climate change) and recover.”

Mr. Tymon responded to questions in the Q&A session that followed his keynote remarks.

MORNING SESSION PANEL DISCUSSION

An interactive panel discussion, “How is New Jersey Department of Transportation Creating Pathways to Sustainability?” followed the keynote session. NJDOT staff representatives presented several examples of sustainability initiatives underway at NJDOT in various areas including construction and materials selection, pavement preservation, transportation planning, project management and research. The presenters reflected on the opportunities and persistent challenges as well as the benefits of addressing sustainability in New Jersey.

The panelists included:

  • Alex Borovskis, Director, New Jersey Department of Transportation Division of Construction and Materials
  • Robert Blight, Executive Manager, New Jersey Department of Transportation Division of Pavement & Drainage Management and Technology Bureau
  • Krishna Tripathi, Project Management Specialist, New Jersey Department of Transportation Division of Project Management
  • Mohab Hussein, Supervising Engineer, New Jersey Department of Transportation Bureau of Structural Design & Geotechnical Engineering
  • Sushant Dargi, Principal Engineer, Planning, New Jersey Department of Transportation Bureau of Statewide Strategies
  • Giri Ventikeela, Innovation Officer, Bureau of Research, Innovation & Information Transfer
Pathways to Sustainability Panel
How is New Jersey Department of Transportation Creating Pathways to Sustainability?

Participants responded to a series of questions posed by the moderator and by the audience members.

Panelists shared their views on how the New Jersey Department of Transportation is creating pathways to sustainability.

AWARDS

The program continued as Pragna Shah, New Jersey Department of Transportation, announced several awards given in recognition of research, innovation and implementation efforts. Below is a listing of the award winners presented at this year’s showcase:

2024 Outstanding University Student in Transportation Research Award – Deep Patel, Rowan University. Mr. Patel received the award for his valued contributions to research on “Real-Time Traffic Signal System Performance Measurement” through successive phases and several other recent and ongoing NJDOT projects.

2024 NJDOT Research Implementation Award – Dr. Peter Jin, Rutgers University, New Brunswick Innovation Hub Smart Mobility Testing Ground (Data City SMTG). This project, partially funded by NJDOT, generated a living laboratory for transportation data collection and smart technology innovation across a 2.4-mile multi-modal corridor in New Brunswick.

2024 Best Poster Award – Swathi Malluru, Rowan University, Performance Evaluation of Full-Depth Reclamation and Cold In-Place Recycling Asphalt Mixtures at Varying Amounts of Bituminous and Cementitious Additives. This poster described research activities conducted towards evaluating best practices in Full-Depth Reclamation (FDR) and Cold In Place Recycling (CIR) asphalt rehabilitation. The researchers distributed surveys to state agencies, conducted a literature review and performed laboratory tests, finding that 3 percent emulsion, with 1 percent cement worked best for FDR mixes, and 2 percent emulsion or 1.5 percent foamed bitumen for CIR mixes.

2024 Research Champion Excellence Award – Yong Zeng and Emmanuel Bassey, Technical Advisory Panel at the New Jersey Department of Transportation. This award recognized Yong Zeng’s and Emmanuel Bassey’s dedication serving as Technical Advisory Panel (TAP) members for the research project, Advanced Reinforced Concrete Materials for Transportation Infrastructure. Their work greatly contributed to the success and implementation of the project, which received an AASHTO National High Value Research Award in 2024.

2024 NJDOT Build a Better Mousetrap (BABM) Award – Bishoy Abdallah, Senior Engineer in Transportation Roadway Design at NJDOT. The BABM award was given to Bishoy Abdallah for his creative response to current NJDOT roadway standards that require all resurfacing and preservation projects to upgrade existing inlet curb pieces to have a smaller opening. To make more efficient the process of upgrading existing inlet curbs, Abdallah created two details; one specifically for barrier curbs that do not need to be replaced, and the second for damaged or cracked barrier curbs.

Awards Ceremony
Presentation of 2024 Awards
2024 Outstanding University Student in Transportation Research Award, Deep Patel, Rowan University, Real-Time Traffic Signal System Performance Measurements
2024 NJDOT Research Implementation Award, Dr. Peter Jin, Rutgers University New Brunswick Innovation Hub Smart Mobility Testing Ground (Data City SMTG).
2024 Best Poster Award, Swathi Malluru, Rowan University, Performance Evaluation of Full-Depth Reclamation and Cold In-place Recycling Asphalt Mixtures.
2024 Research Champion Excellence Award, Yong Zeng and Emmanuel Bassey, New Jersey Department of Transportation. Advanced Reinforced Concrete Materials for Transportation Infrastructure.
2024 NJDOT Build a Better Mousetrap Award, Bishoy Y. Abdallah. New Jersey Department of Transportation, Division of Highway and Traffic Design. Replacing Inlet Curb Pieces in Existing Concrete Barrier Curb

HIGH VALUE RESEARCH

In addition to the awards announced and distributed by NJDOT for the 26th Annual NJDOT Research Showcase, the event highlighted two NJDOT research projects that were recognized with 2024 AASHTO National High Value Research Awards at the Research Advisory Committee (RAC) national meeting in Columbus, Ohio in late July 2024.

Advanced Reinforced Concrete Materials for Transportation Infrastructure. One of only 16 research projects nationwide to receive the 2024 AASHTO National High Value Research Award, this project evaluated the performance of three highly ductile concrete materials in comparison to two standard NJDOT mixtures. The results of the research can be used to guide best practices around deploying novel concrete materials to improve the service life of reinforced concrete infrastructure. Principal Investigators: Dr. Matthew Bandelt and Dr. Matthew Adams of New Jersey Institute of Technology; Technical Advisory Panel: Yong Zeng, Nehemie Jasmin, Emmanuel Bassey; Research Project Manager: Dr. Giri Venkiteela of NJDOT BRIIT.

Innovative Pothole Repair Materials and Techniques. This research project tested several new pothole repair materials and techniques including the use of recycled asphalt pavement (RAP) and PVA fibers. The research findings can be used to produce longer lasting and more sustainable roadways. The research project received a Supplementary National High Value Research Award from the AASHTO RAC. Principal Investigators: Dr. Hao Wang and Dr. Husam Najm at Rutgers-CAIT; Technical Advisory Panel: Sadime Absolam, Jeff Evanylo, Emmanuel Bassey, Kenrick Layne, Nicholas Colangelo, Anupkumar Patel, Roger Estivalletti, Yong Zeng; Research Project Manager: Dr. Giri Venkiteela of NJDOT BRIIT.

2024 National High Value Research Award, Yong Zeng, Nehemie Jasmin, Emmanuel Bassey, Giri Venkiteela, and Matthew Bandelt. NJDOT. Advanced Reinforced Concrete Materials for Transportation Infrastructure.
2024 AASHTO Supplementary National High Value Research Award, Sadime Absolam, Yong Zeng, Emmanuel Bassey, Giri Venkiteela, Husam Najm, Hao Wang and Anupkumar Patel. NJDOT. Innovative Pothole Repair Materials and Techniques.

AFTERNOON 

In the afternoon, concurrent break-out sessions were held and research presentations were given on the topics of Infrastructure, Sustainability and Safety. Students and researchers at New Jersey’s colleges and universities also presented their research objectives, methods and findings in a concurrent poster session offering those in attendance an opportunity to learn more about ongoing and recently completed research and interact with the researchers.

INFRASTRUCTURE BREAKOUT

Infrastructure Sessions
Evaluation of Performance of Bridge Deck with UHPC and LMC Overlays through Accelerated Structural Testing. Nenad Gucunski, Rutgers University
Complex Simulation of Large Ship Impacts on Bridges. Anil K. Agrawal, The City College of New York
Navigating the Future: Sustainable & Resilient Infrastructure. Indira Prasad, Stevens Institute of Technology
Cost-Effective Pavement Management System for Municipalities in New Jersey. Yusuf A. Mehta and Surya Teja Swarna, Rowan University

SUSTAINABILITY BREAKOUT

Sustainability Sessions
How Concrete is Becoming a Carbon Sponge. Mohamed Mahgoub, New Jersey Institute of Technology
Development of Pavement Design Procedures and Construction Specifications for Cold Central Plant Recycling (CCPR) Asphalt Mixtures. Abhary Eleyedath, Rowan University
Towards Use of Stabilized Sediments as a Sustainable Alternative to Traditional Infrastructure Materials: A Laboratory and Numerical Study. Tyler J. Oathes, Rutgers University
Life-cycle assessment of ultra-high-performance concrete (UHPC) beams using advanced monitoring technologies. Fatemeh Mohammadi Ghahsareh, Stevens Institute of Technology

SAFETY BREAKOUT

Safety Sessions
Towards UAS-based Real-time Video Streaming and Data Analytics for Estimating Highway Traffic Flow Characteristics. Meiyin Liu, Rutgers University
Enhancing VRU Safety in Urban Streets Using LiDAR and Crossing Warning System. Joyoung Lee, New Jersey Institute of Technology
Examining the Applicability of Waze Crash Alert as a Real-Time Crash Detection Tool. Dejan Besenski, New Jersey Institute of Technology
Developing a Pedestrian-Scale Lighting Resource to Improve Safety for Vulnerable Road Users. Ruqaya Alfaris and Greg Woltman, Rowan University and Rutgers University

2024 POSTER PRESENTATIONS

Development of a model to predict the Micro-Deval Abrasion (MDA) Resistance Based on Mechanical and Minerals Oxides Properties of Aggregates
Investigating Mechanical Responses of Cold In-Place Recycled Asphalt Pavement Sections Under Accelerated Truck Loading by Finite Element Modeling
Integrating AI to Mitigate Climate Change in Transportation Infrastructure
Performance Evaluation of Full-Depth Reclamation and Cold In-Place Recycling Asphalt Mixtures at Varying Amounts of Bituminous and Cementitious Additives
Assessment of Box Culvert Reinforcement Using Ground Penetrating Radar: A Case Study of NJDOT Structures
“Equity & Safety” Hand in Hand on the Road to Success
Artificial Intelligence Aided Railroad Grade-Crossing Vehicular Stop on Track Detection and Case Studies
Review of Concrete Structure Demolition Technologies
Determining the Effectiveness of Commercial Vehicle Safety Alerts


The 26th Annual Research Showcase was organized and sponsored by the NJDOT Bureau of Research in partnership with the New Jersey Local Technical Assistance Program (NJ LTAP) at the Rutgers Center for Advanced Infrastructure and Transportation (CAIT) and co-sponsored by the Federal Highway Administration.

Wildlife Corridors and Crossings in NJ’s Road Network: A Conversation with NJDEP & NJDOT

Wildlife crossings help to bridge greenspaces divided by roads, streets, and highways through the creation of safe alternative pathways for wildlife. For the past forty years, wildlife crossings have been a part of New Jersey’s transportation network. The state’s first known crossing, a terrestrial overpass, was created during construction of Interstate 78. Since that time, the number of wildlife crossings has increased, and continues to do so with the support of the New Jersey Department of Transportation (NJDOT) and the New Jersey Department of Environmental Protection (NJDEP).

With myriad benefits for both nature and humans, wildlife crossings establish essential connections within a sustainable, resilient, and safe ground transportation network. To learn more about NJDOT and NJDEP’s effort to increase and improve wildlife crossings in New Jersey, we spoke with several staff members during a group interview.

From NJDOT:

  • Domenica Mousa, Environmental Specialist, North Environmental Team, Office of Landscape Architecture and Environmental Solutions
  • Rachel Dekovitch, Supervisor, North Environmental Team, Office of Landscape Architecture and Environmental Solutions 
  • Amber Cheney, Section Chief, North Environmental Teams, Office of Landscape Architecture and Environmental Solutions

From NJDEP Fish and Wildlife, Endangered & Nongame Species Program:

  • Gretchen Fowles, GIS specialist and wildlife biologist, , Co-lead of Connecting Habitat Across New Jersey (CHANJ)
  • Brian Zarate, wildlife biologist, CHANJ Co-lead
  • Mackenzie Hall, wildlife biologist, CHANJ Co-lead

The following Q&A is a summary of the conversation which has been condensed and edited for clarity.


Q.  It is estimated that there are over one million annual wildlife vehicle collisions nationwide involving large wildlife. The need for, and related benefits from, wildlife crossings vary but can include benefits to both human safety and wildlife survival, as well as cost savings. What other potential benefits come to mind when you think of roadway wildlife crossings?

NJDOT:  New Jersey is a densely populated state with an intricate network of roadways, often cutting between greenspaces. These greenspaces, including forests, fields and streams are home to a variety of species, many of which travel and explore. Unfortunately, these two realities cause a significant amount of traffic collisions; the most serious of which are caused by deer. These collisions can be very unsafe for drivers, passengers, and wildlife. Fortunately, wildlife crossings can be implemented to keep fauna away from the roadway. The result? Safer drivers, passengers, and wildlife.

A figure from the CHANJ Guidance Document (page 64) that illustrates key design elements of effective wildlife crossings.

NJDEP:  From the Department of Environmental Protection’s perspective, wildlife crossings provide important environmental benefits in addition to reducing wildlife fatalities. The division of greenspaces by roads and highways is considered habitat fragmentation. Habitat fragmentation worsens the conditions of endangered species, affects ecosystem function, and reduces the ecosystem’s resiliency. In short, it keeps species from moving, mating, and finding food. The implementation of wildlife crossings helps to reduce habitat fragmentation and improve connectivity. Often this improved connectivity creates healthy ecosystems where populations can behave and survive naturally and move about as they wish. Connectivity also contributes to the maintenance or restoration of ecosystem function and ensures rare species have a chance to recover. Even non-rare species can help maintain their health and population with improved connectivity. The NJDEP team wants to build all these redundancies into the ecosystem to allow the more imperiled species to have opportunity to recover, while also maintaining populations of existing species that are seemingly doing well.

Q. Many New Jersey highways and roadways fragment wildlife habitats and challenge migratory paths. With one of the densest road networks in the country, how does your department address concerns of biodiversity and habitat connectivity within the context of road and bridge development?

NJDOT: Each bridge or road project goes through an environmental review to identify any environmental issues or constraints within that project area. As a part of the analysis, we screen for federally and state-listed threatened or endangered species. If such species are found, restrictions or guidelines are specified. For example, if the proposed area has birds that are listed under the Migratory Bird Treaty Act, or has endangered or threatened bats, we put a time restriction on when tree clearing may take place. These efforts help to preserve the habitat by limiting tree cutting to periods when animals are less present, typically from November 16h to March 31st.  

The NJDOT Office of Landscape Architecture (OLA) started a Pollinator Program in 2020 to help promote biodiverse connectivity throughout the State along our appropriate right of way while considering alternate mowing opportunities. Our Capital Program projects seek to enhance the native species of the specific location, and we use our Pollinator Program to supplement and create more locations. Each year OLA applies for funding through State funds for these plantings. Many times, these locations are chosen based on the best management practices (BMP) of the Maintenance yards that reach out to us for consideration of locations. These created sites help offset and maintain assurances of our Department’s compliance with the Endangered Species Act. 

NJDOT is increasing the number of pollinator habitats along roadways. Recognized benefits include more pollinators (bees, birds, butterflies, etc.), roadside beautification, increased carbon intake, less mowing and herbicide maintenance, and soil erosion prevention. Source: NJDOT.

In 2023 we became more proactive in establishing habitat for the Monarch Butterfly and created the 100,000 Milkweed Initiative.  With the funding set aside for pollinators we planted over 100,000 of 3 types of Milkweed species throughout the State.  To date we have created over 11 Acres of Milkweed Specific habitat and over 40 Acres of additional Pollinator and reduced mowing areas through the Pollinator Program.  NJDOT Lands are significant in creating a linear and ideal habitat for Pollinator activities which is also why we address Pollinator Habitat through Capital Program Projects.

Q. In a recent “Lunch and Learn” presentation, it was noted that changes to the NJ Flood Hazard Control Act Regulations require that NJDOT evaluate new and existing bridges, culverts, or roadways for fragmentation of habitat for threatened and endangered and/or any species of special concern and provide a wildlife species passage if a project is determined to cause fragmentation of habitat. How has this requirement affected your work program? Has this change heightened interest in wildlife connectivity?

NJDEP: The NJDEP Flood Hazard Area Act regulation has led to a significant increase in the number of permitted and implemented terrestrial wildlife crossings. It has also fostered more projects and collaborations across NJDOT, other NJDEP divisions, as well as with counties and municipalities, and non-profit organizations.

However, the regulation can sometimes create challenges. For example, while habitat fragmentation might be occurring, the feasibility of installing a wildlife crossing might be difficult because of other infrastructure in the area or the stream’s hydrology. In such cases, NJDEP and NJDOT work together to determine the best course of action.

Q. As noted, this topic is of interest nationwide. The FHWA Wildlife Crossing Pilot Program (WCPP) has $350 million in federal aid funding available through 2026 for state DOTs and others. FHWA plans to release the next NOFO shortly. Has NJDOT considered pursuing one of these grants for a construction or non-construction wildlife corridor project?

NJDOT has pursued this competitive grant, unsuccessfully. The FHWA grant focuses on human and driver safety and projects where large mammal collisions are occurring, making projects for smaller wildlife species, less likely to be awarded a grant, and most of our projects focus on smaller animals. Losing smaller animals poses a risk to the health of the ecosystem, and future justifications will consider this.

The Wildlife Crossings Pilot Program grant is just one of many options within the Bipartisan Infrastructure Law, which offers historic support to tackle habitat fragmentation and wildlife mortality. Other opportunities within the law may be more helpful to pursue, such as eligible formula allocations, rather than competitive grants. That said, NJDEP Fish and Wildlife successfully applied for a Transportation Alternatives Program grant that is resulting in the construction of an amphibian crossing in northern New Jersey, but it took ten years of work to get to this stage. The crossing has not yet been constructed but anticipated in the next year or so.

Q. Can you tell us a little bit about the North Atlantic Aquatic Connectivity Collaborative?  How does NJDOT participate with NAAAC?

We are participating with the North Atlantic Aquatic Connectivity Collaborative (NAAAC) program to survey current culverts and bridges and evaluate possible wildlife passages. Once surveyed, this information becomes available on the Connecting Habitat Across New Jersey (CHANJ) online mapping tools and via online or downloadable GIS services. The use of these maps can help to identify when there is an existing barrier for terrestrial or aquatic species. We also use other GIS layers, such as the NJDEP Landscape Project and CHANJ, that is also included on the map to determine if there are any terrestrial species of concern and suitable habitat on either side of the culvert/bridge or in the area. For each project that requires an NJDEP Flood Hazard Area permit and involves a bridge or a culvert, we use this map to write up a brief analysis, which we then send to NJDEP.

CHANJ Web Viewer is used to determine habitat fragmentation. Source: NJDEP

Q. According to research, the evaluation and development of road crossing projects are mostly being led by several organizations including the NJ Department of Environmental Protection, North Atlantic Aquatic Connectivity Network, and other localized, environmentally-focused organizations. What role does NJDOT have with these organizations and projects?

NJDOT works with NJDEP to prioritize and list culvert and/or bridge sites that need to be surveyed for NAACC. This year, NJDOT employees will join in the analysis, conducting site surveys to enhance the online dataset for future projects that may require crossings. By collaborating with NJDEP Fish and Wildlife and various watershed groups across the state, NJDOT and its NAACC partners have assessed about 700 culverts so far. Each has been mapped on the CHANJ web tool, which identifies wildlife habitats, cores, and the corridors that connect them.

NJDEP and NJDOT use the CHANJ mapping tool and NAACC generated layers to understand connectivity for both land use and transportation projects, including NJDOT projects.

By collaborating with NJDEP Fish and Wildlife and various watershed groups across the state, NJDOT and its NAACC partners have assessed about 700 culverts so far.

Regulatory officials evaluate the map when assessing Flood Hazard Area permits. The map also helps provide a general sense of connectivity within the state, aiding in targeting areas for road improvements, land acquisition, and habitat restoration. These actions are crucial for creating a functionally connected network of land. The CHANJ mapping of habitat cores and corridors, along with all NAACC culvert data, help prioritize sites.

NAACC culvert analysis is often conducted by trained watershed groups and NJDEP Fish and Wildlife seasonal employees. Montclair State University serves as the state lead and coordinator, offering training for interested parties. Free training and resources are also available online from the University of Massachusetts.

The NAACC collaboration spans 13 states in the Northeast region. The NJ NAACC map allows users to select squares on the map (which indicate a culvert) in order to access the regional database. Once the user is redirected to the regional database, they are able to access the corresponding pictures of the culvert, if it has been surveyed, as well as the culvert’s dimensions. This innovation helps users understand what lies under specific road stretches simply by the click of a mouse.

Q.  The Connectivity Habitat Across New Jersey (CHANJ) interactive mapping tool catalogues current and completed projects, the passability of road culverts for aquatic and terrestrial species and other details. This map is partly a product of the NAACC 13 state map that aims to compile wildlife connectivity information into one database, and relies on culvert assessments using the NAACC culvert inventory. The map does not include information about roadkill or auto collisions with wildlife, which limits the basis on which a project could be installed. Are there plans or current processes to collect data on wildlife collisions and roadkill? 

Screenshot of CHANJ Web Viewer. Source: NJDEP

NJDOT maintains crash records based on police reports that may refer to wildlife collision. However, NJDOT does not currently collect any data regarding roadkill.  NJDEP Fish and Wildlife collects roadkill location data, but only for select species like bobcats, bears, coyotes, otters, and beavers. Those data are combined into a roadkill dataset.  For some species, like the state listed bobcat, biologists collect the carcass, and sample it to glean as much information as possible that contributes to their understanding of the health of the population.

Q. Maine Audubon worked with Maine DOT and UC Davis Road Ecology Center to build a crowdsourcing tool that drivers could use to report the location of roadkill. Is NJDOT currently using any type of crowdsourcing in this way? Are there plans to record more information about roadkill and collisions? 

The new NJ Wildlife Tracker tool expands NJDEP’s data by collecting resident reports of rare species sightings and observations. For instance, someone can report seeing a turtle by a stream using this mobile-friendly web application. Reporting is also open to all species, rare or not, that are on roads. This tool aims to increase awareness of roadkill, and to help identify roadkill ‘hot spots.’ 

CHANJ Web Viewer can be accessed on smart phones, a convenient application for those working in the field. Source: NJDEP

The NJ Wildlife Tracker and NJ Fish and Wildlife data mining help identify road mortality hotspots. Between the two we currently have around 7,000 roadkill records in our database.  We are developing a standardized roadkill collection tool, where individuals monitor important road segments bisecting habitat cores and corridors identified by the CHANJ map and report wildlife sightings. Regular commuters can report on specific road segments, providing detailed data for rigorous hotspot studies.

This data is useful for pursuing grants or projects. For example, the upcoming Waterloo Road Amphibian Crossing Project in Byram Township, Sussex County, was justified by years of collected data.

Beyond data collection, we use other tools to interpret and analyze findings. Animal data points require careful interpretation due to their constant movement. One key tool is the NJDEP Landscape Project mapping, which uses wildlife observation location data to infer valuable habitats.

However, there are concerns about crowdsourcing and public data access, particularly regarding the illegal wildlife trade. Detailed mapping tools can be exploited by poachers. At this time, this information is only accessible by NJDEP.

Q. Are there any technologies that have been useful in designing and modifying infrastructure to better suit wildlife? 

Sometimes simple modifications to infrastructure can ensure effective wildlife crossings. For instance, adding a ledge to a culvert can allow animals who avoid water to cross. Bobcats are one species that benefit from this inclusion. The ledge is ideally a natural stream bank within the bridge or culvert, but can also be constructed of concrete or gravel, and  can be tailored to the species present and their needs. All design modifications require hydrology and hydraulics analysis to determine if the modification is feasible.

Through CHANJ, there are two main tools: a map and a guidance document. The guidance document includes best management practices for designing wildlife passages across different taxa. While not high-tech, these practices significantly improve the effectiveness of crossings.

Q.  The NJ Pilot Road/Stream Crossing Assessment focuses on culverts to improve connectivity for aquatic wildlife; however, NJ is also home to terrestrial wildlife that require special crossings. How do you approach this divide in your work, and what are some ways that transportation agencies can design passages that are suitable for both terrestrial and aquatic wildlife? 

Designing wildlife crossings can be complex, especially when dealing with driveways and land use constraints. Studies have shown that incorporating effective fencing is crucial for directing animals towards crossings and preventing wildlife from accessing the roadway. Innovative designs include using flexible recycled plastic fencing directly attached to structures, which helps prevent animals from breaching gaps. Some designs feature a protective lip to deter animals from climbing over.

Advancements in monitoring technology, such as infrared cameras, are proving invaluable. NJDOT is initiating a project to monitor several highway underpasses not originally designed for wildlife but identified as potential crossings. Infrared motion detection captures warm-blooded animals, while specialized setups capture cold-blooded animals. These technologies provide crucial data on wildlife usage of these crossings.


Resources

  • Connecting Habitat Across New Jersey (CHANJ). (u.d.). NJDEP Fish & Wildlife. [Website]. Guidance Document and Mapping Web Viewer Tool. Accessed here.
  • Connecting Habitat Across New Jersey (CHANJ). (u.d.). NJDEP Fish & Wildlife. NJ Wildlife Tracker Public Survey. Report sightings of (1) Rare Species and (2) Wildlife on Roads/Roadkill. [Tool]. Accessed here.
  • Crowdsourcing for Wildlife Road. (2019). Maine Audobon. [Presentation]. FHWA Local Aid Support Exchange Webinar. Retrieved here.
  • Flood Hazard Areas. (u.d.). NJ Department of Environmental Protection. [Website]. Accessed here.
  • Fowles, G., Zarate, B., and Hall, M. (2023). Connecting Habitat Across New Jersey (CHANJ) Assessments. Final Report for September 1, 2017–August 31, 2022. Project Number: W-78-R-1. 1. NJDEP Fish & Wildlife. Retrieved here.
  • North Atlantic Aquatic Connectivity Collaboration (NAACC). (u.d.). [Presentation]. NJDOT Lunch and Learn. Retrieved here.
  • North Atlantic Aquatic Connectivity Collaboration (NAACC). (u.d.). [Website]. Retrieved here.
  • North Atlantic Aquatic Connectivity Collaboration (NAACC). (2019). Culvert Condition Assessment Manual. [Report]. Prepared in association with UMASS-Amherst Engineering, UMASS-Amherst The Center for Agriculture, Food and the Environment and The Nature Conservancy. Retrieved here.
  • Wildlife Crossings Program. (u.d.). [Website]. Federal Highway Administration. Retrieved here.
  • Weber-Leaf, Pamela. “New Jersey’s Animal Crossings Protect Our Wildlife from Dangerous Traffic”. (October 9, 2024). New Jersey Monthly. [Article]. Retrieved here.

FHWA Issued Its EDC-7 Progress Report #1

The Every Day Counts Round 7 Progress Report #1 is now available here.  

Every Day Counts (EDC) is the Federal Highway Administration’s (FHWA’s) program to advance a culture of innovation in the transportation community in partnership with public and private stakeholders. Through this State-based effort, FHWA coordinates rapid deployment of proven strategies and technologies to shorten the project delivery process, enhance roadway safety, reduce traffic congestion, and integrate automation.

The Progress Report describes the seven technologies and practices FHWA is promoting in EDC-7 and summarizes the deployment status of each innovation as of April 2024 and each innovation’s goal for adoption by 2025.

More information on the EDC-7 Round Innovations, including the initial Baseline Report can be found here.

Interview with “Best Poster Award” Winner at 2023 Research Showcase: “Properties of Cementitious Materials with Reclaimed Cement”

Concrete production is energy intensive, and requires materials that are both challenging, and expensive to acquire. Material engineers are seeking alternative materials that are more cost-effective and carbon-friendly, but also operate successfully as road and building material.  

We spoke with Alyssa Yvette Sunga, a graduate researcher at Rowan University who won the Best Student Poster Award at NJDOT’s 2023 Research Showcase. Her research, “Properties of Cementitious Materials with Reclaimed Cement,” evaluated the characteristics of cementitious materials mixed with varying percentages of reclaimed cement. Sunga and her fellow researchers examined each mixture’s initial setting time, heat of hydration and compressive strength and compared it against ordinary Portland cement. The purpose: to determine if adding reclaimed cement has any effect on the durability and use of cementitious materials. If there is little to no adverse effect, reclaimed cement may help reduce the need for new materials and can reduce the carbon bi-product of concrete. Dr. Shahriar Abubakri (Shah), Ms. Sunga’s supervisor at Rowan University, also joined us for the interview. 


Q. Could you tell us a little bit about your educational and research experience and how you got where you are now as a graduate research fellow at Rowan? 

A. I’m an international student from the Philippines. I graduated from the University of the Philippines – Los Banos in 2017 with a Bachelor of Science in Civil Engineering. After that, I worked in industry from 2018 to 2022. My former undergraduate professors, who were graduate students here [at Rowan], reached out to me asking if I was interested in pursuing graduate studies. I applied and began my Master’s in Civil Engineering in January 2023. 

Q. What interested you about researching the properties of reclaimed cement? Do you hope to continue research in pavement materiality? 

A. The environmental impact of reclaimed materials like cement is interesting to me. Cement production is a significant contributor to carbon emissions, so finding ways to reuse it is essential. Additionally, reclaimed cement presents unique challenges and opportunities in terms of material properties, durability, and performance. 

So, in a way, we’re helping produce less carbon emissions; that’s what interested me about this study. 

I’m currently working on a lot of different concrete projects. We’re hoping to develop more efficient construction approaches, but I also aim to contribute to the development of innovative techniques and solutions that will optimize reclaimed materials in construction projects. We also aspire to collaborate with industry partners and government organizations, so that we can implement these sustainable practices on a full-scale project in the future. 

Alyssa Sunga received the Best Poster Award for Student Research At the 25th Annual NJDOT Research Showcase in October 2023.

Q. Was there anything particularly noteworthy or surprising to you discovered from this research? 

A. Yes, there’s potential for reclaimed cement and enhancing the performance of unsustainable construction materials. We did not expect that we could use it as a replacement cement or as a supplementary cementitious material. Through various experiments, we found that using this reclaimed cement or incorporating it in cementitious mixtures resulted in comparable properties such as durability, strength, and workability. 

Q. Your research looked at cement paste and mortar specimens incorporated with up to 20% Reclaimed Cement and found no significant difference for the flow measurement and setting time. Should further research be done with higher percentages of reclaimed cement? Why did your research cap it at 20%? 

A. We’re planning to do further research on larger amounts of reclaimed cement. We just used 20% as a cap to get a general idea of the effect of partially replacing ordinary Portland cement with reclaimed cement. Now that our research with 20% is showing good results, we plan on doing tests with higher percentages in the future. 

Q. Your research found that cement paste specimens with up to 20% Reclaimed Cement (RC) saw a 4% reduction in compressive strength after 90 days. What does this mean for applicability (i.e. is 4% a significant reduction? does this make cement paste with 20% RC not suitable for pavement?) 

A. A 4% reduction may seem small, but it must still be taken into consideration. However, as long as the strength is within a recommended range, then it is suitable for pavement applications. 

Q. Is there a percentage of reclaimed cement that is most likely not suitable for pavement? 

A. Alyssa: My advisor would like to jump in to answer that. 

Shah: The acceptable percentage of reduction in concrete strength depends on the specific application and the assumptions made by the designer. For instance, practical standards like the American Concrete Institute (ACI 301.1.6.6) typically require that the average strength of three samples meets or exceeds the specified compressive strength. Additionally, each individual sample within this set should not fall below 500 psi of the designed strength. It’s important to note that concrete’s compressive strength can vary widely, ranging from 2500 psi to 5000 psi, and even higher in residential and commercial structures. Some applications may require strengths exceeding 10,000 psi. So, in cases where the required strength aligns with the design strength, even higher reductions may be acceptable. 

Q. Mortar specimens with 20% RC had a different result and surpassed the strength after 28 days. Why do you think this was a different result from cement paste specimens? What does this mean for applicability? 

A. This difference in result may be due to different factors, but mortar differs from cement paste due to the additional materials like sand. So, this can influence the hydration and the strength development, but we still need to do further research to understand the long-term performance and durability or the effect of adding different materials to the cementitious materials.  

We still must do further research to see the effects of adding different materials like sand and gravel to cement paste. If we’re going to use it in concrete, that’s another additional material like an aggregate. It’s just a matter of the specific materials. There are a lot of factors — like the temperature where you make your specimens. So, it’s always just trial and error. There’s no trend to it really. 

Q. Your poster suggests that incorporating up to 20% RC has some promising benefits including reducing carbon emissions. What are some of the other benefits?  

A. Incorporating the 20% RC will help mitigate supply shortages because we’re able to provide an alternative source of material instead of just using cement. It also promotes eco-friendly construction practices, contributing to sustainable transportation infrastructure, and research on reclaimed cement enables ongoing enhancements in material performance and construction methods. 

Q. You have mentioned throughout this interview where there’s a need for more research. Can you describe some specific things that you would really like to research about incorporating reclaimed cement into cementitious materials? 

A. The most important part of this research is determining what is the optimal mix proportions to use and then studying the effects on fresh properties and assessing the long-term durability like compressive strength, the tensile strength. These investigations are crucial for understanding the full potential of reclaimed cement in construction. Personally, I’m deeply interested in exploring these research areas further. 

Q. What kind of impact do you hope this research will have on material selection by transportation agencies? 

A. I hope this research convinces transportation agencies to use reclaimed cement in pavements. It’s sustainable, cost effective and performs well — aligning with transportation agencies’ goals and standards. This could lead to a greener and more resilient transportation infrastructure. 


Resources

Sunga, A., Abubakri, S., Lomboy, G., Mantawy, I. (2023). “Properties of Cementitious Materials with Reclaimed Cement”. Rowan University Center for Research & Education in Advanced Transportation Engineering Systems. Poster.

Yvette Sunga, A., Abubakri, S., Lomboy, G., & Mantawy, I.M. (2024). Properties of Cementitious Materials with Reclaimed Cement. Presented at IABSE Symposium: Construction’s Role for a World in Emergency, Manchester, United Kingdom, 10-14 April 2024, published in IABSE Symposium Manchester 2024, pp. 428-434. Retrieved at: https://structurae.net/en/literature/conference-paper/properties-of-cementitious-materials-with-reclaimed-cement

For more information about the 25th Annual NJDOT Research Showcase, and to see other award-winning posters, visit: Recap: 25th Annual NJDOT Research Showcase – NJDOT Technology Transfer (njdottechtransfer.net)

Testing Biometric Sensors for Use in Micromobility Safety

Biometric sensors have long been used in cognitive psychology to measure the stress-level of individuals. These sensors can measure a variety of human behaviors that translate as stress: the movement of eyes, stress-induced sweat, and heart rate variability. Recently, this research strategy has moved beyond psychology and into disciplines like transportation planning, to provide an alternative approach to researching micromobility and stress.  

We spoke with Dr. Wenwen Zhang, associate professor at the Edward J. Bloustein School of Planning and Public Policy at Rutgers University, about her experience learning about and using biometrics for a micromobility study. Dr. Zhang’s research, “Rider-Centric Approach to Micromobility Safety” examines the stress levels of micromobility users as they transverse a varied path through an urban space.  


Q. How is your research funded? 

A. Funding comes from multiple sources. The first source is a seed grant from the Rutgers Research Council which supports an interdisciplinary pilot project. Through this grant, we purchased biometric sensors and hired students to conduct a literature review and develop a research design. We also processed the collected pilot data and paid for participation incentives under this funding. I presented preliminary findings from this study, Rider-Centric Approach to Micromobility Safety, at the 2023 NJDOT Research Showcase. At the time that I presented it, I had 24 samples. The presentation ended up inspiring several people who attended the Research Showcase to volunteer as participants—which increased the sample size to 30.

Our other source of funding came from an external grant from the C2Smart University Transportation Center (UTC) at NYU. We used this resource to support obtaining additional stress sensors, data analysis, cleaning, preprocessing, and modeling, as well as collecting more sample data for the E-scooter and bicycle experiments.

Q. How did you get interested in using biometrics sensors (e.g., eye tracking glasses, galvanic skin sensor, heart rate monitors) to study micromobility safety? How does this research differ from your past work? 

A. Before I used biometric sensors, most of my work used passive travel behavior data. For example, to determine the revealed preferences of mode and route choices and risk factors, we used travel trajectory or existing crash big data to develop statistical models. I have found that the entire process is very passive, especially since we only explore risk factors after traffic accidents. It’s surprising that in the research field today we know so little about how human beings actually navigate urban environments while using different travel modes and how it relates to perceived safety. I wanted to explore questions like what is their gaze behavior? How do they feel while they travel using different modes? How do they feel traveling on roads with different design features and how is that going to influence their travel satisfaction or experience overall? 

Dr. Robert Noland, Distinguished Professor at the Rutgers Bloustein School, suggested I investigate the use of biometrics in planning studies. As I dug more into the literature, I realized that biometrics in transportation is a very fascinating topic that I wanted to get into. Once I did experiments in the field, I realized that I really enjoyed talking with different people about how they perceive the built environment while they travel. Biometrics provide richer data compared with revealed preference data that I used to work with.

Q. In your research, you noticed that some corridors were more stress-inducing (according to biometric sensors) than expected, despite properly designed safety infrastructure. How do you think this discovery may affect how planners and engineers look at urban road design and micromobility safety? 

 A. This study collected one-time cross-sectional data. We asked people to walk around an area and tell us whether they feel stressed or not. If they are feeling stress, even in the presence of a safety improvement, it does not necessarily mean that the implemented safety design is not working. For example, in New Brunswick, we observed that a lot of people found it stress-inducing to cross Livingston Avenue, although it has been the subject of a road diet and has several pedestrian safety features incorporated into the new design. While outside our scope of research, one way to understand the impact of the safety infrastructure would be to conduct a “before” and “after” study. This leaves an opportunity for more research, to see how effective the pedestrian-only infrastructure is in reducing stress level. Potentially, it can provide evidence to support pedestrian-only design. Biometric sensors used in a “before and after” study can help us to answer which infrastructure is more preferred. 

Q. You are in the process of collecting data for cyclists and e-scooters using the same method, what are your principal objectives in addressing this segment? Do you expect the results to be different?

Dr. Zhang conducted one pilot e-scooter experiment at Asbury Park, NJ in 2022 to test out the devices and examine how to set up research experiments. She equipped the e-scooter rider, Dr. Hannah Younes, post-doc researcher at the Rutgers Bloustein School, with an eye tracking glass, a GSR sensor on the hand, and a 360-degree camera on top of the helmet.

A. Yes, absolutely, different travel modes will likely alter a person’s expectation for a safe travel environment. For example, we noticed a big difference in the enjoyment of pedestrians and e-scooters on the same path through a park. We had thought that the e-scooter users would enjoy the ride as the pedestrians had, however, the pavement was too rough for the small wheels of the e-scooters. Although the park was walking-friendly, it was not friendly for e-scooters. This shows that each of these micromobility modes needs different kinds of support to feel safe and comfortable.

Q. What are the limitations to this study? Do you have plans for future research to address this? How would you like to expand your research in this topic?

A. Each of the biometric sensors has limitations. For example, eye trackers face some difficulty when identifying the pupils of a participant in direct sunlight. As a result, the eye tracker renders a low eye tracking rate. Eye trackers also work better with darker eyes as the eye movements are more readily recognized. The eye trackers, kept on glasses, also restrict individuals who wear glasses from participating. The unfortunate result of this is that it often excludes a lot of senior people from the experiment. This issue may be alleviated as we are obtaining additional funding to obtain prescription lenses for eye trackers.

GSR sensors use low voltage on skin to measure skin conductivity, which may interfere with electric health devices. This limits individuals from participating if they have an electric health device like a pacemaker on or in their body. We purposefully excluded this population from participating to align with IRB (Institutional Review Board) protocol and to mitigate any risks.

Another limitation of the study is that we must collect sample data one by one, which is a time-consuming process. We can only collect a very small sample compared to a traditional statistical model kind of study, which may have access to thousands of records in the sample. From our literature review, biometrics sensor studies typically involve 20 to 30 participants, but for each participant we have a very rich dataset. For each participating volunteer, we end up with over one gigabyte of data. The limited number of participants may make it harder to generalize results to the entire population, and people may question the results applicability. In some ways this data is similar to the results of qualitative studies, where we have richer information but small sample size, rendering some generalizability issues. 

Feelings of safety were measured using the traditional self-report survey as well as biometric trackers like Heart Rate Trackers, Eye trackers and GSR (pictured above).

Q. What challenges have you found in working with biometrics sensors, or in the interpretation of output measures?

A. The eye tracker and heart rate measures are reliable, but some biometrics have posed challenges. The GSR (galvanic skin response sensor), which tests your sweat level, is very sensitive to humidity and time of the day. The sensor also picks up on sweat resulting from physical exertion, making it difficult to distinguish between stress-induced sweat and physical sweat.

Interpretation of output measures for this metric requires data cleaning and processing to eliminate the effect of sweating from physical exertion. We try to decompose the data to separate the emotional peak from the sweating caused by physical activity using various algorithms. We are still underway testing out different algorithms to clean up the data. So far, we have found that GSR data are very real-time in nature and a good indicator for stress level but are very noisy data and requires some manual processing. This means we spend a lot of time preprocessing the collected data before conducting data analysis. 

Q. How do you expect this research to inform transportation agencies in New Jersey and elsewhere?

A. This type of research captures such rich data on travel behavior itself. Most of the literature using biometrics has been focused on driving, so this research expands the perspective. Here we’re focusing on slow mobility, like active travel and micromobility. Individuals who participate in slow mobility are more vulnerable road users, and we want to see how they behave in different travel environments. This can help agencies gain more insights into how to design safety infrastructure. Beyond that I can also envision the technology being used to evaluate whether certain improvements or infrastructure designs help to improve travel satisfaction or improve people’s experience at the same location by doing “before and after” studies. This type of study also allows you to measure and quantify the effect of the improvement. 

The use of biometric sensors in the field can also be used to foster meaningful public engagement processes to show the lived experience of different people in a neighborhood or traveling through a different corridor, which can be very powerful.

Q. Do you feel the research methods are at a stage where they are “ripe” for use on other demonstration projects, planning or project development studies?

A. After one year of experimentation, our project team can readily work with biometrics. We have a good understanding of sensor limitations and how to set up the sensors to correctly reduce noise as much as possible. Our experience has also helped determine what kind of metrics can be extracted successfully and reliably through the sensors.  

The most useful case for those sensors is to evaluate before and after, so that we can quantify how much people appreciate those implementations in a more accurate way. Beyond that, the sensors can also be effective infrastructure assessment tools. For example, imagine that you ask people to wear biometric sensors and do a bicycle infrastructure evaluation; the agencies can get more realistic and rich data compared with a more traditional survey approach. This rich data can help determine the most effective improvement. It ends up being more inclusive that way.

The tools can be very useful for fostering community engagement with vulnerable populations. For example, if agencies want to improve the accessibility for wheelchair users, they can ask individuals in wheelchairs to wear the sensors and move about an area. Recording and reviewing how they experience a journey is more powerful compared with just asking individuals with needs about their travel patterns. It’s going to be a more straightforward way to show the world how we can make the streets more inclusive for those vulnerable populations. 

Q. Do you think local governments and non-governmental organizations could make use of biometrics sensors as a strategy to promote community engagement and outreach to local communities, or to address specific community safety or livability issues?  Would it be cost-prohibitive to employ such tools for such community-based planning issues at this time?  

A.  From my point of view, the most effective way would be for the agencies to identify where there are needs and promising projects and then work with skilled researchers or practitioners who have these sensors already and have begun to climb the learning curve in the use of sensors and interpretation — for example, they could work with us. They would need to pay for the researchers’ time and participation incentives, or if they were to collaborate with a UTC (University Transportation Center) to conduct such research collaboratively.  

The sensors are not the most expensive part of the study. The most expensive item is the researcher’s time to collect and analyze the data. The data are very complicated to analyze in the first place because it’s a large amount of data with noises. The researchers need to put in a lot of time to get it to the state where you can extract the relevant variables out and start to interpret them.

Q. How would you characterize the “state-of-training” in using biometrics for students or early career or mid-career professionals in transportation?    

A. The biometric sensor itself is not very new, but new to the transportation field, especially for slow modes. It has been widely used in cognitive psychology, where there are classes to interpret those as well. Generally, I don’t think the current transportation and urban planning curriculum for students includes enough classes to cover those sensors. We probably need to teach not only biometric sensors, but urban sensing in general. 

In an ideal course, students could get their hands dirty by putting those sensors in the field and then once the data are collected, they can learn how to preprocess and analyze the data. It would have to be a one-year kind of curriculum design to get people involved and ready for it. Of course, instruction on the use of sensors will differ by topic. For example, if you are working in the air quality field, then there are many different air quality sensors and each of them come with different data formats and require different experiment design and analytic skills.

Regarding the mid-career transportation professional, at this moment I believe the research is more in the academic field and focusing on testing and evaluation. I wouldn’t suggest that the research is so ripe that a mid-career transportation or urban planner professional should need to invest their time in learning how to use biosensors unless they have a research project that may benefit substantially from using the sensors.  


Resources

To learn more about the use of biometrics in the field of active transportation, see:

Ryerson, M., Long, C., Fichman, M., Davidson, J.H., Scudder, K.N., Kim, M., Katti, R., Poon, G. & Harris, M., (2021). Evaluating Cyclist Biometrics to Develop Urban Transportation Safety Metrics. Accident Analysis & Prevention, Volume 159, 2021. Retrieved from https://www.sciencedirect.com/science/article/pii/S0001457521003183?via%3Dihub

Fitch, D.T., Sharpnack, J. & Handy, S. (2020). Psychological Stress of Bicycling with Traffic: Examining Heart Rate Variability of Bicyclists in Natural Urban Environments. Transportation Research Part F: Traffic Psychology and Behavior, Volume 70, 2020, Pages 81-97. Retrieved from https://www.sciencedirect.com/science/article/pii/S1369847819304073?via%3Dihub.

To read more on Dr. Zhang’s work, see:

Zhang, W. (2023). Rider-centric Approach to Micromobility Safety. 25th Annual NJDOT Research Showcase. Presentation. Retrieved from https://www.njdottechtransfer.net/wp-content/uploads/2023/11/Zhang-Safety-2nd-Presentation.pdf.

Zhang. W. 25th Annual NJDOT Research Showcase. Recording starts at: 59:00. Retrieved from https://youtu.be/D_rQP-Dv8gU

Zhang, W., Buehler, R., Broaddus, A. & Sweeney, T. (2021). What Type of Infrastructures do E-scooter Riders Prefer? A Route Choice Model. Transportation Research Part D: Transport and Environment, Volume 94, 2021. Retrieved from https://www.sciencedirect.com/science/article/pii/S1361920921000651.

For more information about the use of biometrics in the broader transportation field, see NYU’s C2SMART’s research project on Work Zone Safety:

Exploring the Future of Environmental Product Declarations at NJDOT: Q&A Interview with NJDOT’s Project Lead


Under the FHWA’s Climate Challenge, state DOTs and local agencies receive training and work with various stakeholders including those from industry and academia to implement projects that quantify the environmental impacts of pavements using Life Cycle Assessment (LCA) and Environmental Product Declarations (EPDs). EPDs provide an in-depth look at the use effects and environmental impacts of materials, processes, and mixtures. With a general goal to reduce carbon emissions, DOTs are moving towards the use of EPDs for selecting pavement uses and processes.

We spoke with Nusrat Morshed, Project Engineer in the Pavement Design & Technology Unit at NJDOT, about two FHWA project grants funded under the Climate Challenge initiative that she supervises. Both projects focus on the potential use of EPDs and LCA in New Jersey and will allow for NJDOT to develop a strong baseline understanding of EPD use.


FHWA Funded Climate Challenge Projects

Q. Can you tell us about two FHWA-funded Climate Challenge projects listed for New Jersey. How is NJDOT currently involved in these FHWA funded projects? What are tasks for these projects?

A. NJDOT applied for this research project funding in early 2023 after the advertisement was released. I had spoken with representatives from Rowan University and Rutgers University to gauge their interest in this research, and both were on board. EPDs is a very new concept and term within the transportation field. This made it challenging to determine what the project scope should be for our grant applications. We received funding from FHWA immediately, but there were some technical issues in the allocation of state and federal funding shares that we needed to sort out before we could proceed. Both research teams officially began work in September and October of 2023 and they will have until the end of 2024 to carry out the work.

The research team for Project 1, Utilization of EPDs and LCAs to Promote Sustainability in NJ’s Pavements, is led by Dr. Yusuf Mehta from Rowan University and they are teamed with the research sub-consultant, Advanced Infrastructure Design (AID). The objective of this project is to utilize EPDs and LCAs to promote consideration of sustainability in maintaining NJDOT’s pavement infrastructure. The tasks within this project scope include: conducting a literature review, defining the goals and scope of the comparative LCA analysis, data collection, and analysis of results and interpretation.

The research team for Project 2, Improve Sustainability of Asphalt Pavement Overlay in NJ, is led by Dr. Hao Wang from Rutgers University. The research project objective is to improve the sustainability of asphalt pavement overlay in New Jersey. The project’s basic tasks include: documenting experiences and lessons of using FHWA’s LCA PAVE tool based on analysis of pavement overlay project in New Jersey DOT, evaluating quantification methods for calculating carbon emissions at the use phase of pavement, providing recommendations for use of LCA in decision making of pavement overlays, and preparing a final report and presentation.

Example EPD summary, retrieved from USDOT FHWA Tech Brief: Building Blocks of Life-Cycle Thinking

I am the key point person for both projects.

Q. What is the status of these FHWA funded projects? What resources have been helpful so far?

A. Both projects are underway now but still in the early stages. I received a status report from Project 1 about a month ago and expect a status report from Project 2 before March. For both projects, the focus has been to complete a literature review. One resource that was particularly helpful was the National Asphalt Pavement Associations (NAPA) website, as they have a lot of information on EPDs — 15 EPDs thus far have been identified — which are NJDOT specifications. We have also reached and had a meeting with the Port Authority of New York and New Jersey (PANYNJ) to get information on their own EPD process.

Q. The FHWA Climate Challenge program seems like it has established an approach to promote knowledge sharing and fostering a community of practice. Can you tell us about it?
A. Every quarter, FHWA conducts a climate challenge webinar, and on this webinar there is usually a featured presentation from an expert and then brief update presentations from climate challenge project teams. These project teams extend beyond New Jersey, so other states can hear how NJDOT is doing with these projects and we can learn from our peers in other states.

Previously our updates have been limited to 2 or 3 slides, however, later this spring I will have two reports to base our presentation upon, which will be more comprehensive and reflective of NJDOT’s progress.

Attendees at a Climate Challenge Training session. source: FHWA

The quarterly webinars have been helpful and instructive. EPDs and sustainable resiliency are also very hot topics and several other resources are emerging that we can reference. For example, there was an entire session on EPDs at the Transportation Research Board’s Annual Meeting. Published literature has also been very helpful.

As a part of the project grants, FHWA is providing EPD-specific trainings. Both research teams and I have brainstormed about trainings our teams require. I have coordinated with FHWA as a Climate Challenge member and explained our training needs for accomplishing these two projects. FHWA and I drafted an agenda based on these research needs and we have scheduled a day and a half in-person training for March 2024. I requested that both of my teams submit their findings, as a status report before that training. So it also will be our official first status meeting for both project teams.

As a Project Engineer overseeing these projects, I am not able to work directly with the research, but I provide guidance to the universities and have been the communication bridge between them and FHWA. The training is hosted by FHWA and conducted by FHWA and a third-party organization that specializes in EPDs. These trainings are hosted throughout the U.S. To make this happen, FHWA provided us with their schedule, and we negotiated a time for them to do the training in March 2024.

Q. Who was in attendance for this training?

The training was done on March 12-13, 2024 at NJDOT. This training was focused on team members from both projects. There were representatives from the NJDOT Bureau of Materials, NJDOT Bureau of Statewide Strategies and NJDOT Division of Environmental Resources who participated.

Q. How has this funding assisted with NJDOT’s Every Day Counts (EDC) EPDs related goal?

Unless a NJ STIC Incentive Grant is awarded, FHWA does not provide any funding directly for advancing the EDC-7 innovation, but instead supports the deployment goals through the mobilization of FHWA resource specialists or subject matter experts who are farther along with innovation’s deployment. Luckily, the research of EPDs is a goal within EDC-7, so both of the funded Climate Challenge projects are indirectly supporting that EDC-7 goal.

Q. Have any pilot programs begun?

As we are still in the research stage for EPD use, we have not created any pilot programs yet.

Environmental Product Declarations in the Future

Q. Can you describe the status and implementation goal for NJDOT’s EDC-7 goal for advancing EPDs in New Jersey?

NJDOT’s EDC-7 goal for advancing EPDs in New Jersey is still in the preliminary stages of information gathering. Both of these climate challenge projects will assist with building up a robust set of literature that is necessary for next steps. Our goal is to get ideas for future recommendations. As of now, I would say we need to identify a few plants or suppliers and get some real-time data for different types of considerations based on research needs. Then we need to identify which way we can achieve EPD targets like lowering carbon emissions.

The stages of Pavement’s life cycle. Retrieved from USDOT FHWA Sustainable Pavements Program.

Q. What challenges, if any, has NJDOT faced while working to incorporate EPDs into pavement considerations?

EPD is based on many stages, which require their own literature review. For example, a product category rule, or a set of rules for measuring life-cycle analysis must be developed first. EPDs have different stages that all must be measured — specifically, the production stage, transportation stage and construction stage, or as they are called the A1, A2, A3. Achieving the goal of reduction in carbon emissions through EPDs requires a lot of research and literature review, and it will not be easy to get all the needed information, even when speaking with experts. Starting from scratch, the ability to quantify an EPD could take at least two years. So, it’s not that you will be getting something very quickly. We are just exploring now what is out there and how we can think about something in terms of New Jersey’s pavement mixes.

Q. How does NJDOT use or reference the published EPDs in New Jersey as reported by the National Asphalt Pavement Association’s Emerald Eco-Label tool?

We have looked at the National Asphalt Pavement Association (NAPA) website and reviewed their own PAVERS tool. It has been helpful to see how they do life-cycle analysis. They have their own LCA tool and we use the FHWA LCA tool — so there will most likely be differences. The FHWA LCA tool is expected to be updated soon.

Q. Do you foresee NJDOT having an embodied carbon clause added to NJDOT contract specifications? Will contractors be expected to submit an asphalt mix that provides EPDs to be considered for future contracts?

LCA PAVE Tool assists with analysis and quantification of the environmental impacts of existing products or processes. Retrieved from USDOT FHWA

Yes, definitely, we can dream, but it will take time. We need to identify and set the product category rule. More research is needed, maybe there will be future training opportunities on this topic from FHWA.

Q. Where is the biggest research gap when it comes to the incorporation and use of EPDs? Is it research on the pavement itself, or life cycle analysis, or something else?

EPD is not a single term, but a combination of a lot of things. In the process of determining an EPD for one pavement treatment, you must consider the process of installation, the type of pavement or asphalt mix, the binder and aggregate within the mix, etc. Because each of these processes require their own considerations, we must make the decision on what process and pavement, or asphalt mix should be evaluated first. We can then use our results to determine where the use of EPDs would be most helpful, or which process should be studied next. In other words, we cannot do everything at once, but rather start very specifically and focused, and then move out.

The five steps of developing Environmental Product Declarations (EPD). Retrieved from Tech Brief: Building Blocks of Life Cycle Thinking

 Q. Has NJDOT had an opportunity to use or test the FHWA LCA Pave Tool? If so, how does it use the tool?

I have used that tool before, but I just use it as a general gauge as I don’t have any real-time data currently. I will need training in the future on how to efficiently use the tool based on actual data. I also think this tool will be helpful in the future for determining if our results are realistic. Our research team members are using this tool.

 Q. How are you feeling about this initiative?

As a state government employee, I see this initiative as an effort that will help NJDOT be aligned with NJ’s clean energy policies. EPDs are a new topic for us, and everyone is very interested in learning more about it, including me. The funding opportunity that FHWA provided allows DOTs throughout the U.S. to explore this new topic and determine its applicability in the future of pavement and asphalt design.


Resources

FHWA Climate Challenge – Quantifying Emissions of Sustainable Pavements. FHWA webpage. Retrieved at https://www.fhwa.dot.gov/infrastructure/climatechallenge/projects/index.cfm

LCA Pave Tool. FHWA webpage. Retrieved at https://www.fhwa.dot.gov/pavement/lcatool/

Emerald Eco-Label. Webpage. Retrieved at https://asphaltepd.org/published?state=NJ

What is Environmental Product Declaration (EPD) for Sustainable Project Delivery? Webpage. Retrieved at: https://www.njdottechtransfer.net/epds-for-sustainable-project-delivery/

Life Cycle Assessment: Part I Fundamentals. Webinar, FHWA Sustainable Pavements Webinar Series. Retrieved at: https://youtu.be/uaJ8wGMAPD0?si=oBHnBSN2K1589JEa

An Introduction to Life Cycle Assessment: Part II – EPDs and PCRs, FHWA Sustainable Pavements Webinar Series. Retrieved at: https://www.youtube.com/watch?v=Y4OqVR6U2Us

Sustainable Pavements Program. FHWA Webpage. Retrieved at https://www.fhwa.dot.gov/pavement/sustainability/

Sustainability Analysis: Environmental. Life Cycle Assessment (LCA). FHWA Webpage. Retrieved at: https://www.fhwa.dot.gov/pavement/sustainability/environmental/

Meijer, J., Harvey, J., Butt, A., Kim, C., Ram, P., Smith, K., & Saboori, A. (2021). LCA Pave: A Tool to Assess Environmental Impacts of Pavement Material and Design Decisions-Underlying Methodology and Assumptions (No. FHWA-HIF-22-033). United States. Federal Highway Administration. Retrieved at: https://www.fhwa.dot.gov/pavement/lcatool/LCA_Pave_Tool_Methodology.pdf

Milleer, Lianna; Ciaviola, Benjamiin and Mukherjee, Amlan. (February 2024). EPD Benchmark for Asphalt Mixtures, SIP-108. Prepared for National Asphalt Pavement Association by WAP Sustainability. Retrieved at: https://www.asphaltpavement.org/uploads/documents/EPD_Program/NAPA-SIP108-EPDBenchmarkForAsphaltMixtures-Feb2024.pdf

STIC Incentive Program Funds are Available!


The Federal Highway Administration (FHWA) offers STIC Incentive Funding, as well as technical assistance, to support the standardization and advancement of innovative practices. The NJ STIC receives $125,000 each year and state and local public agencies in transportation are eligible to apply.

To be eligible, a project or activity must have a statewide impact in fostering a culture for innovation or in making an innovation a standard practice, and must align with FHWA’s Technology Innovation Deployment Program goals.  The NJ STIC will consider projects and activities that advance innovations such as the Every Day Counts (EDC) innovations that are being promoted by FHWA.  

Proposed STIC project ideas are prioritized by the NJ STIC for each federal fiscal year. Selected projects are then submitted to the Federal Highway Administration (FHWA) for approval. The request submittal does not guarantee funding nor award of funding.

The NJDOT Bureau of Research, Innovation and Information Transfer is ready to answer your questions and assist applicants. For more information on eligibility, proposal requirements, past funded projects, and more, please visit: the New Jersey STIC Incentive Fund Requests webpage.


NJDOT Lunch and Learn: An Inside Look at the Research Library and its Digitization Project


In the 1940s, the State Highway Department (predecessor to the New Jersey Department of Transportation) created its first departmental library for transportation information. For the past 80 years, this depository of relevant transportation articles and materials has grown. Today NJDOT’s research library is a part of the Bureau of Research, Innovation & Information Transfer. The library offers employees several research and career development resources and holds a collection of documents of notable histories of transportation in New Jersey.

As a part of the NJDOT’s Lunch and Learn series, on February 22, 2024, Eric Schwarz, NJDOT’s research librarian, gave NJDOT employees an overview of the resources available through the NJDOT Research Library and directed a portion of his talk to “Discoveries in the First Year of the NJDOT’s Digitization Project.” The digitization project is an effort to make past documents, films, and other materials from the NJDOT archive, accessible online. Eric has been instrumental to the digitization project, leveraging resources of the multi-state Transportation Research and Connectivity Pooled Fund Study Digitization Project [TPF-5(442)].

The Lunch and Learn presentation gave NJDOT employees an overview of the NJDOT Research Library and highlighted several digitally archived historical materials and “lessons learned” during the first year of NJDOT’s digitization project.

Materials range from historic newspaper articles of The Highway to documentary clips of past infrastructure projects and initiatives. Materials have been selected, catalogued, indexed, processed, and preserved by Eric. The digitized materials are now accessible on the Internet Archive’s page for the NJDOT Research Library and contribute to the overall story of transportation in New Jersey.

Notably, the digitization efforts led to uncovering the names of several NJDOT employees who died while working for the department and its predecessor agencies. Five of these individuals were recognized at the Annual Remembrance Ceremony held in September 2023 with name plaques added to a Memorial Wall maintained by NJDOT at Headquarters. As noted during the Lunch and Learn presentation, additional documentary evidence has been found of persons who lost their lives while on duty as the digitization project has proceeded in recent months.

Eric’s presentation conveyed how the digitization project contains a well-spring of information that may prove of interest to historians and other researchers. Digitized materials like old photographs, maps and videos show the makeup of the highway commission in 1922, the number of miles in the State Highway System in 1925, and the number of women who have served as transportation commissioner. The digitized materials reveal several ways that NJDOT has contributed to safety innovations in transportation, including the implementation of cloverleafs, breakaway signs, center barriers, and the piloting and expansion of Emergency/Safety Service Patrol operations. This and other information about the state’s transportation history was made engaging and interactive through mini-pop quizzes.

Eric displayed the research poster about the Digitization Project presented at the Transportation Research Board Annual Conference held in Washington DC in January of 2024 at the Lunch and Learn event.

In addition to describing the digitization process and lessons learned participating in the pooled funded study, Eric gave an overview of the NJDOT Research Library, including its various services and available resources.

Eric noted reference and research services that can be accessed through the NJDOT Research Library. Employees, as well as other transportation professionals, may access various online resources and databases through the research library. Online databases and other sources include:

  • TRID (Transportation Research Board) — A collection of worldwide transportation research
  • Bureau of Transportation Statistics — Statistical information useful to transportation professionals
  • ROSA-P — the National Transportation Library’s Repository and Open Science Access Portal
  • ASTM Compass — Specialty documents from ASTM, AASHTO, American Welding Society
  • AASHTO (American Association of State Highway and Transportation Officials) — Standards and Publications

The research library also provides professional development tools like exam preparation books that can be lent out for several weeks. These books will help professionals prepare for a range of Civil Service and Professional Exams.

As state employees, NJDOT employees can apply for a State Library card, which must be renewed every two years. This card allows individuals to borrow print materials from the NJDOT research library, as well as the New Jersey State Library

Eric noted that links to several online resources and other information about the NJDOT Research Library can be found on the NJDOT Research Library page including links to the NJ State Library which contains additional transportation-related resources.

In addition to the recording, the Lunch and Learn presentation slides can be found here.


Resources

Notable Digitized Materials

Safety Behavior and Gender Split Differences in Micromobility: A Q&A Interview with Researcher


Q. How was your research funded?    

This work was supported by the National Science Foundation under a grant called “Making Micromobility Smarter and Safer”. The lead on this is Dr. Clint Andrews at Rutgers University and there are several other principal investigators. My study acts as a part of this multi-year research.  

Q.  Can you share a brief overview of your findings? Are the results surprising or unique compared to past research?    

We are one of the only studies comparing the safety behavior of cyclists and e-scooter users across genders. Without considering gender, we found that one-third of cyclists wore a helmet. We also found in our observations that e-scooter users did not wear a helmet. It speaks to how important it is to have safe micromobility infrastructure, especially knowing that people are unlikely to wear a helmet. In the U.S., even if you give everyone a helmet, they’re probably not going to wear it. That’s just how it is. Keeping people safe in other ways is paramount.  

We also found that a greater proportion of women were using e-scooters than bicycles. This is important because cycling has long been a male-dominated mode of transportation, for a variety of reasons. That is true across the world. There are studies that suggest women are less likely to cycle to work because of clothing like wearing a skirt or dress or heels, or fears of sweating. E-scooters remove that hurdle since they are not as prohibitive in terms of clothing and require less physical exertion. So, the vehicle type itself may make a difference. Moreover, women place more importance on bike lane infrastructure than men.  If we are seeing that e-scooters are the preferred mode for females, perhaps e-scooters can help narrow the gender gap in micromobility. 

Q.  Can you talk a little bit about the methods used for this study? How are these methods different from past research? Why did you choose to use traffic cameras for your observations?

This work was done using manual observations, a common method in micromobility studies. Previous research had used observations collected in the field. Instead of having observers in the field, we observed traffic camera footage at one intersection. Because we were observing gender and race as well as group behavior, the footage was useful as it allowed us to pause when needed. It was also less resource intensive than having a person stand in the field since no travel expenses were associated with the analysis.  

Q.  What challenges have you found in working with and interpreting traffic camera footage? With the improvement of AI technologies, do you think there will be an opportunity to automate this process in the future?  Are there any limitations you expect from this type of innovation?  

It is very time consuming and tedious to analyze this much camera footage. We analyzed 35 hours of footage. I would love to have analyzed more, but you have to draw the line somewhere depending on the resources available for the research or project study. Most of the time, we fast forwarded until a micromobility user was detected, but it still requires undivided attention. There is a possibility with current technology to incorporate AI technologies: to use computer vision to detect humans, which then can be manually viewed by a human to assess micromobility mode, gender, and helmet use. This would likely reduce the manual labor… It would be interesting to compare the computer vision model to the work I have done… Nonetheless, computer vision does not differentiate properly between pedestrians and e-scooter users, so it is prone to misidentification, which would lengthen the time taken to observe manually.  

At this point, computer vision cannot detect gender, helmet use, and group riding properly from traffic camera footage. More high-resolution images would be needed to differentiate gender and helmet use (like unobstructed face images) and group riding requires context clues like making eye contact, waiting for one another, etc. AI has the potential, but it is not there yet.  As time consuming as it is, I am confident that we detected every person, which is why we chose to observe the footage ourselves.  

Q.  What are the limitations of this study? Do you have plans for future research to address these?  How would you like to expand your research on this topic?   

The main limitation is the geographical scope of this research; it’s a lot of work for one city. We only analyzed the behavior of micromobility in one location, Asbury Park. It isn’t clear how much the results will translate from one location to another. Mode of transportation and behavioral use depends on many different factors that vary from location to location. There is evidence that the gender gap is smaller for e-scooter users in Brisbane, Australia, but not to the extent observed in Asbury Park. Same goes with helmet use. A larger scale study would be useful. Other limitations include the types of micromobility modes: we only observed shared e-scooters and privately owned bicycles in Asbury Park. So, we’re comparing two different vehicles and two different share types to one another. When analyzing the data, we must consider both of these factors. For example, are behaviors attributed solely to the vehicle or to the share type? Probably both. When you’re looking at the gender gap, is it because it’s an e-scooter or is it because it’s shared that there is a narrower gender gap?  

 An analysis comparing shared and privately owned e-scooters with shared and privately owned bicycles would be great. Differentiating between e-bikes and bicycles would be great too, although the resolution of traffic camera footage makes it very hard to differentiate between the two. Even with an observer onsite, it would be hard to detect, so you would need a survey, but this could alter behavior. In Asbury Park, a lot of people have privately owned e-scooters now, so we could do another study in 1.5-2 years and get additional insights in the same location.  

E-bikes are a growing mode of transportation, but even with traffic camera footage, it is very hard to tell an e-bike apart from a bicycle, so maybe in that case you would need somebody on site actually observing. You’re losing the ability to pause footage, but it might be more useful if you’re looking at e-bikes. Race and age were also very difficult to observe from the footage. It could be easier if someone was in person to observe in addition to the traffic camera footage. Even then, without asking directly the age and race/ethnicity of the user, there will be bias. There are a lot of different things to consider; it really depends on what the question is.  

Q.  How would you like this research to inform transportation agencies and practitioners in New Jersey and elsewhere?    

There are several key points. Users of shared e-scooters and privately owned bicycles are different and behave differently. E-scooter users are more likely to take risks like not wearing a helmet or riding on the road. Planners must ensure that the infrastructure keeps them safe. That is, implementing dedicated protected bike lanes that are connected to a greater network and adding traffic calming measures to slow the speeds of motor-vehicles like raised crosswalks or narrower traffic lanes.

Understanding the reasons behind lane use is important as well, as there are concerns for pedestrian safety. Our research observed that lane use was different; for example, 7 percent of male cyclists rode on the sidewalk, compared to 28 percent of female e-scooter users.

Additionally, having a shared e-scooter system in a city can increase female participation in micromobility use. It is a more gender equitable mode than bicycles. Other agencies might want to implement an e-scooter share program in their town.  

Q.  Your research shows that women were more likely than men to ride on the sidewalk while using an e-scooter or bike. Given that this strategy is illegal in most parts of the country, how can planners, engineers and policymakers use this information to increase feelings of safety for female micromobility users?     

This is really interesting. From my research, there is not a lot that I could say. Implicitly, one of the reasons for someone to ride on the sidewalk instead of the road is that they feel safer on the sidewalk. There is a need to ensure that micromobility users feel just as safe on the road–that is, implement a dedicated and protected bike lane, and provide a clear separation from motor-vehicles.

From our work, we know that there are other more complex factors at play: our research had clear results for road lane use with the implementation of the bike lane, but less clear ones for sidewalk use: sidewalk use was not significantly reduced by the presence of a pop-up bike lane. To encourage safe road use, ensuring a complete network would be a start. The pop-up bike lane was not connected to another bike lane going downtown, for instance. If you’re already coming downtown on the sidewalk, you might be more likely to stay there given the existing curb that would need to be crossed to go from the sidewalk to the pop-up bike lane.  

Q.  NJDOT is sponsoring a program to ensure the implementation of the Statewide Bicycle and Pedestrian Master Plan. In what ways could this master plan or a future one align with the findings in your study?  

The results of this study reinforce that implementing a bike lane provides a layer of safety for micromobility users. Nearly all the increase in bike lane usage came from a reduction in traffic lane usage, not in sidewalk usage. There is so much research out there that shows that bike lanes save lives; in the case of a crash, someone in a bike lane is less likely to be injured. Ensuring that plans accommodate both bicycles and e-vehicles–like e-bikes and e-scooters–is also paramount.  

Q.  The Biden Administration has set a goal to achieve a net zero emissions economy by 2050. How might a shift toward micromobility help the nation reach its climate and carbon emission goals?    

Bicycles are zero emission vehicles. E-bikes and e-scooters produce few emissions, especially privately owned ones since they don’t require rebalancing. Rebalancing shared vehicles requires a car or van and those gasoline emissions are absorbed by those shared e-scooters. Having an e-vehicle do that for rebalancing helps to reduce those emissions. Bicycle-friendly infrastructure, which reduces motor-vehicle infrastructure such as the number of traffic lanes, or parking, can also reduce motor-vehicle use and induce more environmentally friendly travel.   

Q.  How could a focus on reaching these climate goals impact the way that planners and engineers design streets?    


Resources

Blickstein, S.G., Brown, C.T., & Yang, S. (2019). “E-Scooter Programs Current State of Practice in US Cities.” Retrieved from https://njbikeped.org/e-scooter-programs-current-state-of-practice-in-us-cities-2019/

Marshall, H. (2023). “How do Female Cyclists Perceive Different Cycling Environments? – A Photo-elicitation study in Stockholm, Sweden.” Retrieved from https://gupea.ub.gu.se/handle/2077/78209

NJDOT Technology Transfer. (2020). “Tech Talk! Launching Micromobility in NJ and Beyond.” Retrieved from https://www.njdottechtransfer.net/2020/02/25/launching-micromobility-in-nj-and-beyond/

NJDOT Technology Transfer. (2021). “How Automated Video Analytics Can Make NJ’s Transportation Network Safer and More Efficient.” Retrieved from https://www.njdottechtransfer.net/2021/11/08/automated-video-analytics/

NJDOT Technology Transfer.(2022). “Research Spotlight: Exploring the Use of Artificial Intelligence to Improve Railroad Safety”. Retrieved from https://www.njdottechtransfer.net/2022/08/19/researchspotlightairailroadsafety

Rupi, F., Freo, M., Poliziani, C., & Schweizer, J. (2023). “Analysis of Gender-Specific Bicycle Route Choices Using Revealed Preference Surveys Based on GPS Traces.” Retrieved from https://www.sciencedirect.com/science/article/pii/S0967070X2300001X

Salazar-Miranda, A., Zhang, F., Maoran, S., & Ratti, C. (2023). “Smart Curbs: Measuring Street Activities in Real-Time Using Computer Vision,” Retrieved from https://www.sciencedirect.com/science/article/pii/S0169204623000348?casa_token=XPecGlOM6UQAAAAA:vnISsmV2aoJ3iVJefEeqjM24R5izcs66bvukCQObjuSWGTNokotT4CG_1h8UfLih16wn3FMg_Jo [DA1] [KR2] 

Von Hagen, L.A., Meehan, S., Younes, H., et. al. (2022), “Asbury Park Bike Lane Demonstration,” Retrieved from https://storymaps.arcgis.com/stories/c014811ac0c14735bc9c9adc2639e88f.

Younes, H., Noland, R., & Andrews, C. (2023). “Gender Split and Safety Behavior of Cyclists and E-Scooter Users in Asbury Park, NJ,” Retrieved from https://www.sciencedirect.com/science/article/abs/pii/S2213624X2300127X#b0055.

Younes, H., Noland, R., & and Von Hagen, L.A. (2023). “Are E-Scooter Users More Seriously Injured than E-Bike Users and Bicyclists?” Retrieved from https://policylab.rutgers.edu/are-e-scooter-users-more-seriously-injured-than-e-bike-users-and-bicyclists/.


NJDOT’s Research Showcase Recognized as Best Virtual Event by AASHTO Communications Committee

The AASHTO 2023 Best Virtual Event Award recognizes a special event that is held virtually or that includes a virtual component.

AASHTO’s Committee on Transportation Communications – known as TransComm – sponsors an annual skills awards competition to promote the sharing of best practices and to recognize outstanding communications efforts. In October 2023, NJDOT Bureau of Research representatives Amanda Gendek and Pragna Shah accepted the 2023 AASHTO TransComm Skills Award in the Virtual Events Category for NJDOT’s 24th Annual Research Showcase. 

The NJDOT’s Bureau of Research Annual Research Showcase has been held since 1999 and provides an opportunity for the state’s transportation community to experience the broad scope of research initiatives and technology transfer activities conducted by their university and consultant partners. In addition to convening transportation professionals and researchers, the Showcase helps to emphasize NJDOT goals and objectives, share knowledge, and recognize the outstanding and inspiring research being done in the state.

The threat of COVID-19 transmission during the pandemic led to the Research Showcase being held fully online in 2020 and 2021. These fully virtual events resulted in a much larger audience, and even attracted attendees from other state Departments of Transportation. In 2022, as in-person events returned, the NJDOT Bureau of Research sought to find an approach that would maintain that larger audience base.

Amanda Gendek (left) and Pragna Shah (right) of the Bureau of Research with the award.

The 24th Annual Research Showcase, held October 26, 2022, was the first “hybrid” Research Showcase held by NJDOT and allowed individuals to attend the event online, while also allowing those able to gather, network and celebrate in person. Convening in a hybrid format required some additional coordination with the event planning team from Rutgers and Civic Eye Collaborative, a media consultant firm to live-stream the day’s proceedings. In total, 117 virtual participants and 190 in-person participants attended the day-long event.

Whether attending “in-person” or “virtually,” the audience heard from the keynote speaker and panelists on the major theme of the event “Advancing Equity in Transportation.” 

The Showcase theme, “Advancing Equity in Transportation” served as the organizing framework for the keynote speaker and panelists during the morning plenary session. The keynote speaker, Keith Benjamin, Associate Administrator for Highway Policy and External Affairs at the FHWA, spoke about the USDOT’s efforts to advance equity, highlighting the Infrastructure Investment and Jobs Act and the Inflation Reduction Act and various funding and program initiatives to address equity in transportation planning, project development, and other activities, among other topics. A panel session then explored the perspectives of representatives from NJDOT, county government, and transportation management associations (TMAs) who shared examples of the equity initiatives underway in their organizations. Questions and discussion invited panels to further reflect on the challenges and opportunities for advancing equity in transportation in New Jersey.  

The Showcase included afternoon breakout sessions featuring research presentations that continued to address the equity theme as well as other mobility, infrastructure, safety topics in transportation being performed by research faculty, staff, and students and NJ agencies. Several awards were also presented in recognition of research accomplishments and implemented innovations. For a full description of the 24th Annual Research Showcase event, see this recap here.

The 24th Annual Research showcase was recognized with the AASHTO Award for its efforts to enhance accessibility through the virtual platform. In addition to live-streaming the plenary and breakout sessions, the video recordings of the event were posted on NJDOT’s Tech Transfer Video Library and all those who registered were notified of its availability — whether attending in-person or online. Subsequent direct email communications and social media posts have further broadened the audience of potential viewers. To watch recordings from this, and other Research Showcase events, visit the NJDOT Tech Transfer Video Library.

The theme of the 24th Annual Research Showcase was selected in recognition of the significant Federal and state efforts underway to advance equity; Executive Order 13985 established a “whole government approach” to advancing equity and opportunity at the Federal level (left). Dr. Shawn Wilson, then-Secretary of Transportation in Louisiana, headlined a roundtable discussion, “State DOTs: Creating Pathways to Equity” at the Transportation Research Board’s 2022 Annual Meeting (right).